Acrylmeric
Acrylmeric Water-Based Epoxy Primer Membrane
Is this primer membrane right for my project?
- ✓ Concrete and masonry surfaces
- ✓ New or green concrete
- ✓ Swimming pools and water-retaining areas
- ✓ Areas exposed to moisture or hydrostatic pressure
- ✓ Suitable where a water-based epoxy primer and waterproof membrane is required
Not sure which primer you need? Contact us before ordering →
Which size should I choose?
4L Kit – Small to medium priming or waterproofing projects
20L Kit – Larger areas, commercial pools, tanks or retaining walls
Important Before You Buy
- Two-pack water-based epoxy system
- Suitable for concrete and masonry surfaces
- Can be used on new or green concrete where application requirements are met
- Surface must be clean and free from contaminants
- Follow the product datasheet for mixing, drying and recoat requirements
- Check compatibility with the intended topcoat before application
Acrylmeric Water-Based Epoxy Primer Membrane is a two-pack, water-based epoxy system that combines surface priming and waterproofing in one coating. It is designed for concrete and masonry surfaces, including new or green concrete, swimming pools, retaining walls and water-retaining structures.
It provides resistance to moisture, seepage and hydrostatic pressure while creating a suitable base for compatible overcoat systems.
What is Acrylmeric Water-Based Epoxy Primer Membrane?
Acrylmeric Water-Based Epoxy Primer Membrane is a two-pack coating designed to provide both priming and waterproofing protection to concrete and masonry surfaces.
It is designed to help protect surfaces exposed to moisture, dampness, seepage and hydrostatic pressure while preparing the substrate for compatible coating systems.
Where can Water-Based Epoxy Primer Membrane be used?
- New or green concrete
- Swimming pools
- Aquaculture and fish ponds
- Retaining walls
- Water tanks
- Underground car parks
- Basements
- Cement render
- Blockwork
- Masonry surfaces
Can it be applied to green concrete?
Yes. The product is designed for application to green concrete, including concrete approximately 24 hours after pouring, subject to the preparation and application requirements in the product datasheet.
Key Features
- Two-pack water-based epoxy system
- Combines priming and waterproofing in one coating
- Suitable for concrete and masonry
- Can be used on new or green concrete (approximately 24 hours after pouring, subject to application requirements)
- Resistant to seepage, dampness and hydrostatic pressure
- Water-based and low odour
- Compatible with a range of suitable overcoat systems
- Suitable for potable water applications where specified (AS/NZS 4020:2018)
How do I apply Water-Based Epoxy Primer Membrane?
- Available in 4L and 20L kits
- Apply using a brush, roller or suitable spray system
- Product is grey for easier visibility during application
- Ensure the surface is clean and free from contaminants
- Mix Part A and Part B correctly before application
- Follow the product datasheet for drying times and recoat intervals
Always follow the manufacturer’s technical instructions before application.
View manufacturer technical datasheet and application guides →
What does the membrane protect against?
The Water-Based Epoxy Primer Membrane is designed to help protect compatible concrete and masonry surfaces against:
- Moisture penetration
- Dampness
- Seepage
- Hydrostatic pressure
- Environmental exposure
Its performance depends on correct preparation, mixing and application.
Is it suitable for potable water applications?
Yes. The product is listed as compliant with AS/NZS 4020:2018 for use in contact with drinking water, making it suitable for relevant tanks and potable water applications.
Available Sizes
4L Kit
Best for smaller to medium-sized priming or waterproofing areas.
20L Kit
Best for larger areas such as commercial pools, tanks, retaining walls and larger waterproofing projects.
Both kits include Part A Resin and Part B Hardener for mixing.
Frequently Asked Questions
What is Acrylmeric Water-Based Epoxy Primer Membrane used for?
Can it be used on swimming pools?
Can it be applied to green concrete?
Is it waterproof?
Can I use it on masonry?
Can it be used with drinking water?
How is it applied?
What sizes are available?
Does the kit include both parts?
Share
