Concrete Pool Paint for a Durable, Easy-Care Finish
Identify the right Luxapool® coating system for your concrete pool before you order. For suitable bare concrete or sound existing epoxy, PPO recommends Luxapool® Epoxy.
Product guidance based on the concrete condition and existing paint
Calculator and expert guidance to help you order the correct system
Luxapool® Paint – Epoxy Pool Paint 2-Pack System
Which Paint System
Suits Your Concrete Pool?
Concrete tells us what your pool is made from. If it has already been painted, the existing coating tells us what can safely go over it. Select the description that matches your pool before choosing paint.
Bare or unpainted concrete
For bare or unpainted concrete, apply the specified primer, followed by Luxapool® Epoxy. Complete the required concrete curing and surface preparation before application.
Previously painted with epoxy
For sound existing epoxy, clean, abrade and recoat with Luxapool® Epoxy according to the guide. Loose, flaking or contaminated paint must be addressed first.
Previously painted with chlorinated rubber
Do not apply Luxapool® Epoxy or Epoxy Primer directly over chlorinated rubber. Choose the compatible chlorinated-rubber system or ask PPO for advice before purchasing.
I do not know what paint is on the pool
Do not guess. Send PPO clear photos and any coating history you have, and we’ll help you identify the safest next step before you order.
Painting the concrete around your pool rather than the immersed interior? View Luxapool® Poolside & Paving.
Surfaces Commonly Described as Concrete
Concrete pools may be described using different surface names. The existing surface and coating condition still need to be identified before selecting the correct preparation and paint system.
Cement render
A smooth cement finish over the concrete shell. Bare render is primed with Luxapool® Epoxy Primer Sealer before the epoxy top coats.
Pebblecrete or exposed aggregate
A textured, porous surface that uses more paint per square metre. See the dedicated Pebblecrete pool paint guide.
Marblesheen
A polished marble-chip render. Treated like bare cement render: primer first, then Luxapool® Epoxy.
Previously painted concrete
The existing coating decides the system. Confirm whether it is epoxy or chlorinated rubber before you order.
Choosing Concrete Pool Paint Starts Below the Surface
Faded colour, staining and a worn finish can make a concrete pool look ready for a straightforward repaint. But a successful coating starts with more than choosing a colour.
The pool must be structurally sound, clean, dry and prepared for the selected system. Existing paint must be identified and checked for adhesion. Bare or porous concrete may need the specified primer/sealer. Cracks, contamination, moisture and loose coating need to be dealt with before the finish coats are applied.
These steps take planning, but they help reduce avoidable problems such as poor adhesion, uneven coverage or selecting a coating that is incompatible with what is already on the pool.
Concrete is the substrate. The existing coating, if any, determines what can be applied over it.
The Recommended System for Suitable Concrete Pools
Once the pool is confirmed as bare concrete or coated with sound existing epoxy, PPO recommends Luxapool® Epoxy as the appropriate paint system. It is a two-component, high-build coating designed for wet and underwater applications. It forms a durable, glossy and chemical-resistant finish for properly prepared swimming-pool surfaces, including suitable concrete.
It may be used for new or uncoated concrete as part of the specified primer and coating system. It may also suit a concrete pool already painted with sound epoxy, provided the existing coating is confirmed and prepared according to the current Luxapool® instructions.
Purpose-designed for immersed pool surfaces
High-build finish for long-term wear protection
Smooth, glossy surface designed for easier cleaning
Available in a range of pool colours
Applied by roller or brush using the specified system
Confirm the System Before You Order
Bare concrete, sound existing epoxy and chlorinated rubber coatings require different preparation methods and compatible paint systems.
Choose the Correct Concrete
Pool-Paint System
For new or uncoated concrete
Apply the specified Luxapool® Epoxy Primer Sealer, followed by Luxapool® Epoxy. Complete the required concrete curing, preparation and dryness checks according to the current guide before application.
For sound existing epoxy
Confirm that the old coating is epoxy and remains sound. Clean, abrade and recoat with Luxapool® Epoxy according to the guide.
For chlorinated rubber or an unknown coating
Choose the compatible chlorinated-rubber system or ask PPO for guidance if the coating cannot be identified.
Calculate How Much Concrete Pool Paint You Need
Enter your pool’s length, width, shallow-end depth and deep-end depth into the Pool Paint Calculator for an approximate paint and primer estimate.
Coverage varies with the surface and application. Rough, porous or uneven concrete may require more material than a smooth, previously coated surface, so contact PPO if your result is close to a full-kit boundary or the pool has an unusual shape.
Luxapool® Coverage Guidance
Luxapool® Epoxy Primer Sealer: approximately 25–30m² per 4L kit for one coat.
Luxapool® Epoxy Pool Coating: approximately 20–25m² per 3.5L kit, per coat.
Coats: a minimum of two coats of Luxapool® Epoxy; a third coat may be needed to reach the specified film thickness.
Always allow for a little more rather than run short.
How to Plan a Concrete Pool Repaint
1. Identify the existing surface and coating
Confirm the pool is concrete and determine whether it is bare, epoxy-painted, chlorinated-rubber-painted or unknown.
2. Select the compatible system
Match the primer and finish coats to the pool’s actual condition. Ask PPO before buying if the coating history or surface is unclear.
3. Estimate the required quantity
Use the Pool Paint Calculator, then review the estimate against the required number of coats and the condition of the concrete.
4. Prepare and repair the pool
Drain and inspect the pool. Clean away oils, algae, salts and other contamination. Repair defects, remove unsound material, and etch or abrade the surface as the current guide requires. Let the prepared surface dry fully.
5. Mix and apply the coating
Follow the current Luxapool® instructions for mixing ratio, induction time, pot life, weather, coat thickness and recoat timing. Only mix what can be applied within the stated pot life.
6. Cure fully before refilling
Do not refill early. Follow the current technical data for the selected hardener, temperature and project conditions.
A Concrete Pool Finish Planned for Long-Term Performance
Designed for the pool interior
Luxapool® Epoxy is made for wet and underwater applications, giving suitable concrete pools a purpose-designed immersed coating.
Durable, high-build protection
The two-part coating is designed to provide chemical resistance and long-term wear protection when the complete system is correctly prepared, applied, cured and maintained.
Easier project planning
Compatibility guidance, quantity estimates, preparation resources and accessories help you plan the system before the pool is empty and the job is underway.
Support when the answer is not obvious
If the coating is unknown or the surface has problems, PPO can help you decide what information is needed before you purchase.
Why Buy Concrete Pool Paint
from Pool Paint Online?
Genuine Luxapool® epoxy and compatible preparation products
Clear guidance for bare concrete, old epoxy and chlorinated rubber
Pool Paint Calculator for approximate paint and primer quantities
Application guides, technical documentation and how-to resources
Practical support for homeowners and professional applicators
Convenient online ordering after the correct system is confirmed
Concrete Pool Paint FAQs
What paint should I use inside a concrete swimming pool?
Use a coating designed for immersed pool surfaces. Luxapool® Epoxy may suit properly prepared bare concrete or a concrete pool with a sound existing epoxy coating. Ordinary concrete or paving paint is not a substitute for an immersed pool coating.
Can I paint epoxy over old pool paint?
Only if the old coating is compatible and sound. Epoxy may be used over a confirmed existing epoxy coating after the specified preparation. It must not be applied directly over chlorinated rubber.
Do I need primer on concrete?
New or bare concrete generally requires the specified Luxapool® Epoxy Primer Sealer. Previously epoxy-painted pools require a different preparation process. Always follow the current guide for your pool’s condition.
How much epoxy paint will I need?
Use PPO’s Pool Paint Calculator for an approximate estimate. Quantity depends on pool dimensions, number of coats, surface texture, porosity and application.
Can I apply Luxapool® Epoxy myself?
The coating can be applied by roller or brush, but correct preparation, mixing, timing, weather and curing are essential. If you cannot confidently complete the full process, consider using an experienced applicator.
How long can the finish last?
Luxapool® indicates a typical service life of 7–8 years, and up to 10 years in a well-maintained domestic pool. Actual service life depends on the surface, preparation, application, curing, use, colour and pool-water maintenance.
How soon can I refill the pool?
Refill only after the coating has fully cured. Current technical data lists a minimum of 10 days in summer and 14 days in winter before refilling, but the required period can change with conditions. Follow the current product data and project-specific instructions.
For full application and curing guidance, see the Luxapool® Application Guide.
Can I use this on a concrete pool deck or coping?
This page covers the immersed pool interior. For a concrete deck, coping or surround, review Luxapool® Poolside & Paving and its relevant surface guide.
What if I do not know what coating is on my pool?
Do not guess. Contact PPO with clear photos, the approximate coating age and any available pool history before purchasing a repaint system.
Ready to Plan Your Concrete Pool Repaint?
Confirm compatibility, calculate the approximate quantity and choose genuine Luxapool® products for your pool’s specific condition.
Always read the current technical data and application guide before preparation or application.