Case Study: DIY Pool Makeover Using Luxapool® Paint
Share
From Faded to Fantastic: A Real DIY Pool Transformation
There’s nothing quite like seeing your backyard pool come back to life with a fresh coat of paint. In this case study, we follow a homeowner who took on their own DIY pool renovation using Luxapool® Paint — and achieved stunning, professional-looking results without hiring a contractor.
This story shows what’s possible with the right preparation, patience, and premium pool coating system.
Challenge: An Ageing Concrete Pool
Our homeowner had a 25-year-old concrete pool that was showing its age. The old coating was chalky, patchy, and beginning to peel. The goal was to restore the pool’s appearance and durability before summer — on a DIY budget.
After researching options, the homeowner chose Luxapool® Epoxy Pool Paint for its durability, chemical resistance, and glossy, easy-clean finish.
👉 Learn more about Luxapool® Epoxy Pool Paint
Step 1: Draining and Surface Preparation
The project began with fully draining the pool and scrubbing down every surface. Loose paint was removed with a scraper, and remaining areas were pressure-washed to eliminate dirt, chalking, and algae.
Cracks and hollow spots were repaired using Patch & Anchor Polymer Cement, ensuring a smooth, even surface before painting.
💡 Tip: Surface prep can take a full day, but it’s the most important part of the process for achieving a flawless finish.
Step 2: Priming the Surface
Next, the pool shell was sealed using Luxapool® Epoxy Primer Sealer, a high-quality concrete sealer designed for pool coatings. This step improved paint adhesion and helped even out the surface porosity.
👉 Superseal Primer – Surface Sealer for Pool Coatings
Step 3: Applying Luxapool® Epoxy Pool Paint
Once the primer had cured, the first coat of Luxapool® Epoxy Paint was applied using high-quality rollers.
The homeowner followed the recommended process:
- Stirring both components (Part A and Part B) thoroughly before mixing
- Applying evenly in small sections to avoid lap marks
- Allowing a full 24-hour drying period before recoating
After the second coat, the transformation was clear — a glossy, vibrant blue finish that made the pool look brand new.
Step 4: Curing and Refilling
The pool was left to cure for at least 10 days before refilling with water. This ensured the epoxy coating had fully hardened, delivering maximum durability and resistance to pool chemicals.
The homeowner reported that after the refill, the surface was smooth, easy to clean, and beautifully reflective — just like a new installation.
The Result: A Stunning Pool on a DIY Budget
With proper preparation and the right products, the entire project took about a week (excluding curing time). The homeowner spent a fraction of what a professional repaint would have cost and achieved a professional-grade finish that will last for years.
Products used:
Considering a DIY Pool Makeover?
Whether your pool is concrete, fibreglass, or previously painted, Luxapool® offers a high-performance solution.
If your pool was previously coated with a rubber-based system, check out Luxapool® Chlorinated Rubber Pool Paint for an equally durable and easy-to-apply option.
With the right preparation, products, and patience, you can bring your pool back to life — just like this successful DIYer did.